1. The bending machine must have a person responsible for management.
2. The operator must be familiar with the structural performance and usage of the coiling machine and only operate with the consent of the management personnel.
3. Check the safety device carefully before starting the machine.
4. When operating, it is strictly forbidden to place the hands and feet on the rollers and transmission parts and workpieces.
5. After the work is interrupted, the clutch should be hit to neutral.
6, multi-person collaborative work must have a special person command.
7. It is strictly forbidden to work overload.
8. The dumping reset of the lifting roller of the upper roller and the balance of the upper roller shall be carried out after the main drive is stopped.
9. It is forbidden to pile up workpieces and sundries in the workplace, so as to keep the machine and the site clean at all times.
10. After the operation is completed, the power should be cut off and the power box should be locked.
